Quick answer: Yes, C-Hawk boats are a good choice if you want a simple, sturdy center console. Custom Fiberglass Products in Bailey, North Carolina, has built the brand since 2009. It uses hand-rolled fiberglass, “no rot” Perma Ply cores and 316 stainless hardware. Inspect older hulls carefully before you buy one.
C Hawk Boats (often written C-Hawk) was founded in 1977 in North Carolina as a builder of rugged fiberglass boats. Over the years the brand has built center console, cuddy and cabin designs. In 2025–2026 dealer listings, the lineup is mostly center consoles from about 18 to 29 feet.
The company’s goal has always been safe, durable and flexible boats. Contrary to a common claim, C-Hawk did not shut down for good in 2008. Production paused briefly, and in 2009 Custom Fiberglass Products (CFP) of Bailey, NC, took over the brand. C-Hawk boats have been built ever since.
So how good are C Hawk boats, and are they reliable enough to own? Here is what the verified facts show, plus what to check before you buy.
Are C-Hawk Boats Still Being Made, and Who Owns Them?
Yes. C-Hawk boats are still being made. Dealers list 2026 models, such as the C-Hawk 200 Center Console.
Custom Fiberglass Products of Bailey, North Carolina, owns and builds the brand. According to Coastal Angler Magazine, CFP took over in 2009 after a brief pause in production. The brand has existed since 1977. That means C-Hawk has been building boats for about 49 years as of 2026, apart from that short break.
Why do some sources say C-Hawk closed in 2008?
The 2008 date most likely comes from Revelation Boatworks LLC. This short-lived company did business as C-Hawk Boats. The US Coast Guard manufacturer database lists it under manufacturer code RVL, with a factory at 8957 Pace Road, Bailey, NC 27807. The Coast Guard shows it in business only from April 25 to December 3, 2008. That company closed. The C-Hawk brand did not.
Buyer tip: The first three characters of a boat’s Hull Identification Number (HIN) are the builder’s manufacturer code. If a used C-Hawk’s HIN starts with “RVL,” it was built during the 2008 Revelation Boatworks period. Ask the seller for paperwork, and confirm the hull’s history before you buy.
Where Are C-Hawk Boats Built?
C-Hawk boats are built in Bailey, North Carolina, by Custom Fiberglass Products. The brand has been tied to North Carolina since its founding in 1977.
New boats are sold through dealers. Oyster Cove Boatworks is one dealer with a C-Hawk showroom page (linked in the model section below). Before you travel to buy, contact the factory to find the dealer nearest you. A local dealer makes warranty work and service much easier.
How Good Are C Hawk Boats?
C Hawk boats are well built for their size and price class. The construction details CFP publishes are the main reason. C Hawk’s laminate schedule calls for alternating layers of woven and chopped mat. A lamination staff with more than 30 years of experience rolls them by hand. To add to the hull’s structural stability, all core materials are “no rot” Perma Ply Marine Core.
CFP says its post-2009 hulls have stringers fully encapsulated in glass and resin. A “Unistructure” system bonds the stringers and floor into one unit for extra strength. For the finish, CFP’s published C-Hawk description names ArmorFlex gelcoat.
Do C-Hawk boats have wood in them?
According to CFP, all C-Hawk core materials are “no rot” Perma Ply Marine Core, not plywood. The stringers are sealed in glass and resin. For older or pre-2009 hulls, the builder’s published details don’t cover what core was used. Treat any older boat as unknown until a surveyor checks it with a moisture meter.
How Reliable Are C Hawk Boats?
C Hawk follows a “keep it simple” approach, and its heavy-duty construction backs that up. Simple boats have fewer systems to fail. That is a real plus for owners who fish hard and don’t want to fight electrical or plumbing gremlins.
The center consoles are versatile. With the bow rail removed, the open bow is good for fly fishing, with a large casting platform and room to move. The console offers storage space. The electronics box, switch panel and instrument panel hold the main controls.
Reliability in the long run depends on care as much as the build. Engines, wiring and fittings need regular service on any boat. See the maintenance schedule below.
The hull’s deadrise and center console layout are designed to cut down on pounding and spray in a chop. As with any boat, the actual ride depends on the model, the load, trim and sea conditions. A sea trial is the best way to judge it.
How Durable Are C Hawk Boats?
C Hawk builds for saltwater use. The coastal climate causes corrosion, so the builder fights it at the hardware level. C Hawk uses only 316 stainless steel deck hardware. This marine-grade stainless resists rust better than lower grades.
All wiring harnesses are built in-house with tinned copper wire. Tinned wire resists corrosion better than bare copper in a salt environment. The C-Hawk hull’s deadrise design is meant to give a smoother ride in choppy conditions.
The center consoles are suited to bays and inlets as well as shallow flats. Custom Fiberglass Products says its goal is a quality boat that gives owners many years of use.
What C-Hawk Models Are Available?
In 2025–2026 dealer listings, C-Hawk’s lineup is mostly center consoles. No current cuddy, cabin or 42-foot pilothouse model turned up in those listings. Exact specs such as weight, max horsepower and fuel capacity vary by model year. Get them from the builder’s spec sheet or the boat’s capacity plate.
| Model | Type | Size class | Good fit for |
|---|---|---|---|
| C-Hawk 18 | Center console | About 18 ft | Bays, rivers, calm inshore water |
| C-Hawk 200 | Center console | 20-ft class | Inshore fishing, small crews |
| C-Hawk 23 | Center console | About 23 ft | Bays, inlets, fair-weather nearshore |
| C-Hawk 25 | Center console | About 25 ft | Nearshore fishing, larger crews |
| C-Hawk 26 | Center console | About 26 ft | Nearshore and longer runs |
| C-Hawk 29 | Center console | About 29 ft | Offshore trips in suitable weather |
You can visit a dealer’s C-Hawk Models showroom page to take a closer look at current boats.

How much does a new C-Hawk 25 center console cost?
No verified price for the C-Hawk 25 was available for this update. The final price depends heavily on the outboard package, electronics, T-top and trailer. Ask two or more dealers for a written, out-the-door quote with the same engine and options. That makes the numbers easy to compare.
What size engine is best for a C-Hawk 23 center console?
The best engine is one that falls within the maximum horsepower on the boat’s capacity plate. Never go over that rating. Within that limit, use these decision rules:
- Pick near the top of the range if you often run with a full crew, heavy gear or full fuel, or cross open water.
- Pick a mid-range engine if you fish bays with one or two people and care most about fuel cost.
- Ask the dealer for a sea trial with the exact engine you plan to buy. Check hole shot, cruise speed and how the boat handles at cruise.
Are C-Hawk Boats Good Offshore?
The larger C-Hawk center consoles (25 to 29 feet) are the better choice for nearshore and offshore trips in suitable weather. The smaller 18 and 200 models are better suited to bays, inlets and calm inshore water. No boat in this size range is a heavy-weather boat. Your safety offshore depends on the forecast, your skill and your safety gear as much as the hull.
Before you head offshore in any C-Hawk, check the capacity plate. Carry the required safety gear, and file a float plan.
What About Older C Hawk Boats?
C Hawk has been building boats since 1977, with a brief pause in 2009. Over that time the builder has added features based on owner feedback. The earlier C Hawk fiberglass boats built a strong local following, and many are still on the used market.
Older C-Hawk boats came in more styles than today’s lineup, including cabin and pilothouse models. Specific specs for these older boats could not be verified. Ask the seller for original paperwork, and have a surveyor confirm the hull’s condition.
Keep in mind that CFP’s published construction details (encapsulated stringers, Unistructure system) describe post-2009 hulls. An older boat may have been built differently, so inspect it on its own merits.
If you’re looking to buy a used C Hawk boat, you can browse listings on the Boat Trader website. The Smart Marine Guide also lists some older C Hawk boats.
How Do You Check a Used C-Hawk Before Buying?
Use this checklist on any used C-Hawk, especially older hulls:
- Check the HIN. Match it to the title and registration. Note the manufacturer code and model year.
- Walk the deck. Step firmly across the deck, casting platforms and around the console. Any flex or soft spot is a warning sign.
- Inspect the transom. Look for cracks around the engine mounts. With the boat on a trailer, push and pull on the lower unit to check for movement.
- Look at the stringers. Open hatches and check for cracks, separation or signs of repair.
- Use a moisture meter. Have a surveyor scan the deck, transom and hull for trapped water.
- Check the gelcoat. Look for spider cracks, blisters and fresh patches that may hide damage.
- Review engine records. Ask for service logs, hours and a compression test.
- Do a sea trial. Run it at cruise and wide open throttle. Listen for odd noises, and watch for leaks, overheating or electrical problems.

Do They Still Make Parts For Older Models?
Because the brand is still in production, you can contact the builder or a C-Hawk dealer to help track down parts and accessories for your boat. If you need help with repairs or installs, a dealer such as Oyster Cove Boatworks has a Service department.
Common replacement parts on boats like these include rope chocks, cleats, bow and stern eyes, rod holders, navigation lights, batteries, storage boxes, bow storage, leaning posts, handrails, steering wheels, switch panels and windshields.
To ask about parts, use the details on the C-Hawk Contact page. Have your HIN and model year ready. Parts for very old models may need to come from general marine suppliers.
Does the C-Hawk warranty transfer to a used boat?
Verified warranty terms were not available for this update. Before you buy new, ask the dealer for the written hull and deck warranty and the engine warranty, which comes from the engine maker. If you’re buying used, ask whether any remaining warranty transfers and what paperwork or fee the transfer requires.
What Are Typical Problems With C Hawk Boats?
Specific, documented owner complaints about C Hawk boats could not be verified for this update. The problems below are common risks for any fiberglass boat, especially older hulls. Check for them on a used C Hawk.
Delamination. This happens when a core breaks down or pulls away from the fiberglass skin around it. Current C-Hawk boats use “no rot” Perma Ply cores, which are meant to prevent rot. On older or unknown hulls, check for soft spots and use a moisture meter.
Heat stress. Long exposure to strong sun and heat can stress gelcoat and fiberglass on any boat. A cover and shaded storage help.
Impact damage and blisters. Collisions and rough use can crack the fiberglass surface and let water in, which can lead to blisters. Avoid hard impacts. Don’t drop heavy objects on the deck, since dents and cracks can become entry points for water.
Wave and vibration stress. Running hard in big seas puts heavy loads on any hull. Over time, repeated pounding and vibration can wear on the structure and shorten the boat’s service life. Slow down in rough water.
How Do You Maintain a C-Hawk Boat?
A simple routine keeps a C-Hawk in good shape. Follow your engine maker’s manual for exact service intervals.
| When | Task |
|---|---|
| After every trip | Rinse hull, deck and hardware with fresh water. Flush the outboard after salt use. |
| Monthly in season | Check battery terminals, bilge pump, navigation lights and wiring for corrosion. |
| Every season | Service the engine per the manual. Inspect the transom, hatches and through-hull fittings. Wax the gelcoat. |
| Before storage | Winterize the engine, stabilize fuel, dry the boat and cover it. |
Running costs depend mostly on engine size, how often you run, fuel prices, insurance and storage. Ask your dealer and insurer for local estimates before you buy.
How Long Do C Hawk Boats Last Compared To Similar Brands?
A well-kept fiberglass boat like a C Hawk can last 20 years or more. Fiberglass is very durable, and with proper care it can last for decades. Fiberglass does not break down on its own. It wears out because of outside forces.
UV exposure, stress fatigue, water saturation and salt from seawater are the main causes of breakdown.
Too much UV light can make fiberglass brittle. Since most boating happens in bright sun, this is a very likely problem. Covers and regular waxing help.
Water saturation can cause the fiberglass and resin to separate. The most common reason is acid produced by water reacting with materials inside the laminate.
Salt from seawater can work into the pores of the fiberglass and build up in the more porous areas. Rinsing with fresh water after each trip slows this down.
How Does C-Hawk Compare to Parker, Carolina Skiff, Sea Pro and Sportsman?
Verified side-by-side specs and prices for these brands were not available for this update. Instead, use the same checklist for each brand and fill in the answers from dealer spec sheets and quotes. That turns a vague brand debate into a fair comparison.
| What to compare | C-Hawk (verified) | Ask the other brand |
|---|---|---|
| Core material | “No rot” Perma Ply Marine Core | What core is used in the deck, transom and stringers? |
| Stringer build | Encapsulated in glass and resin, bonded to the floor (Unistructure) | Are stringers fully sealed and bonded to the hull? |
| Hardware | 316 stainless steel | What grade of stainless is used? |
| Wiring | Tinned copper, built in-house | Is the wiring tinned marine wire? |
| Warranty | Ask the dealer | Hull, deck and transfer terms in writing |
| Dealer nearby | Check with the factory | Who services the boat near you? |
For the Parker vs. C-Hawk question, compare the same size class, the same engine and the same options. Then sea trial both if you can. For more on one rival, see our Sea Pro boats review.
Do C Hawk Boats Hold Their Value?
Verified resale data for C Hawk boats was not available for this update. In general, a fiberglass boat holds value best when it has a solid hull, a well-documented engine and clean records. Larger, well-equipped boats also tend to draw more buyers.
Engine choice matters for resale. For example, one 2019 C Hawk 29 listing was rigged with twin Tohatsu 4-stroke outboards rated at 250 horsepower each. It also had a T-top with an electronics box, a Garmin 12″ XSV GPS and stainless props. Popular power and useful electronics like these can make a used boat easier to sell.
Older models usually cost less, but prices vary widely with condition, engine hours and equipment. Compare several current listings for the same model and year before you make an offer. Get a survey so you know what you’re paying for.
Who Should Buy a C-Hawk Boat?
A C-Hawk is a good fit if you:
- Want a simple, sturdy center console for saltwater fishing.
- Value corrosion-resistant hardware and tinned wiring.
- Fish bays, inlets, flats or nearshore water.
- Live near a C-Hawk dealer for service.
Look elsewhere if you:
- Want a new cabin, cuddy or pilothouse boat. Current listings show mostly center consoles.
- Need a boat over about 29 feet.
- Want lots of luxury features over plain, fishing-first design.
- Have no dealer or qualified service shop nearby.
Final Thoughts
So, are C Hawk boats good? For most fishing-focused buyers, yes. The brand’s sturdy construction backs up a refreshingly simple design. CFP publishes solid build details: hand-rolled laminates, “no rot” cores, encapsulated stringers, 316 stainless hardware and tinned wiring. The brand is still in production in Bailey, North Carolina. For a new boat, get written quotes and warranty terms from a dealer. For a used one, check the HIN, get a survey and do a sea trial before you buy. Done right, a C-Hawk can give you many seasons of fishing and family time on the water.
Related Posts:
- Everglades Boat Reviews: Are They Good and Reliable?
- Angler Boat Reviews: Are They Good And Reliable?
- Sea Pro Boats Reviews: Are They Good And Reliable?
- Scout Boats Reviews: Are They Good And Reliable?
- Stingray Boats Reviews: Are They Good and Reliable?
Frequently Asked Questions About C-Hawk Boats
When was C-Hawk founded?
C-Hawk was founded in 1977 in North Carolina as a builder of rugged fiberglass boats. Production paused briefly in 2008. In 2009, Custom Fiberglass Products of Bailey, North Carolina, took over the brand. C-Hawk boats have been built there ever since, and dealers now list 2026 models.
What sizes do C-Hawk boats come in?
In 2025–2026 dealer listings, C-Hawk boats are mostly center consoles from about 18 to 29 feet. Models include the 18, 200, 23, 25, 26 and 29. The smaller boats suit bays and calm inshore water. The 25- to 29-foot models suit nearshore and offshore trips in suitable weather.
Are C-Hawk boats good for fly fishing?
Yes, C-Hawk center consoles work well for fly fishing. With the bow rail removed, the open bow gives you a large casting platform and room to move. The console adds storage space. These boats also suit shallow flats, bays and inlets, where fly fishing is common.
How can you tell if a used C-Hawk was built in 2008?
Check the first three characters of the Hull Identification Number (HIN). If the HIN starts with "RVL," Revelation Boatworks LLC built the boat during 2008. That company did business as C-Hawk Boats from April to December 2008. Ask the seller for paperwork, and confirm the hull’s history before you buy.
Do C-Hawk boats resist saltwater corrosion?
Yes, C-Hawk builds its boats to resist saltwater corrosion. It uses only 316 stainless steel deck hardware, which resists rust better than lower grades. All wiring harnesses are built in-house with tinned copper wire. Tinned wire resists corrosion better than bare copper. Rinsing with fresh water after each trip also helps.



